Bill Estes Ford Brownsburg
2016 Ford Explorer Oil Filter
Ford Oil Filter service at Bill Estes Ford Brownsburg in Brownsburg, IN
SCHEDULE NOWFrequently asked questionsFrequently Asked Questions
6 common questions answered
Is the oil filter replaced every time a 2016 Ford Explorer has its oil changed?Yes, replacing the oil filter with the oil change is the recommended approach for a 2016 Ford Explorer.
The filter holds debris collected by the oil, and its condition changes as it loads. Replacing it with the oil gives the fresh oil a clean filter rather than carrying an older filter into another service interval.
- The filter captures debris from circulating oil.
- The manufacturer's schedule calls for replacement every 10,000 miles.
- The new filter is matched to the engine fitted to the vehicle.
What is included in an oil filter replacement on a 2016 Ford Explorer?An oil filter replacement includes an engine-matched filter, a new drain plug gasket or washer where applicable, and a leak check after the engine runs.
The filter is replaced alongside the oil rather than treated as a separate component to stretch across multiple changes. Checking the filter seal after operation helps confirm that the service area is not leaking before the vehicle leaves.
- Filter matched to the engine's specification.
- New sealing gasket or washer where the engine uses one.
- Leak inspection at the filter seal after the engine runs.
What happens if the oil filter on a 2016 Ford Explorer is not replaced?If the filter is not replaced as it loads, its bypass valve can open and oil can circulate without filtration.
A loaded filter does not stop the engine getting oil; it stops the engine getting filtered oil, which can allow debris to continue through the lubrication system. The manufacturer's maintenance schedule and the vehicle's service history help determine when replacement is due.
- Debris remains captured only until the filter loads.
- The bypass valve can allow unfiltered oil circulation.
- Oil may darken quickly after a change when debris remains in circulation.
Does a 2016 Ford Explorer need a specific oil filter?Yes, the filter is matched to the 3.5-liter, six-cylinder V6 engine in the 2016 Ford Explorer.
Filters are not interchangeable across engines simply because they look similar. The correct filter depends on the engine actually fitted, so the service team matches the filter to this Explorer's 3.5-liter V6 without relying on a universal fit.
- Engine displacement: 3.5 liters.
- Cylinder configuration: V6, or six cylinders.
- Filter selection is matched to the engine.
Can the oil be changed on a 2016 Ford Explorer without changing the filter?The oil can be changed separately, but the filter should be replaced with the oil according to the manufacturer's maintenance schedule.
Leaving a loaded filter in place means the fresh oil is working through a filter that already holds collected debris. For this model year, the manufacturer specifies oil filter replacement every 10,000 miles, while service history and inspection help establish the vehicle's maintenance position.
- The filter stores debris removed from the oil.
- A loaded filter can open its bypass valve.
- Replacing oil and filter together supports continued filtration.
How do I book an oil and filter service at Bill Estes Ford Brownsburg?You can schedule an appointment online or call Bill Estes Ford Brownsburg at 463-842-1277.
The service center can arrange an oil and filter service for your 2016 Ford Explorer and match the filter to its 3.5-liter V6 engine. The dealership is located at 450 E Northfield Dr, Brownsburg, IN 46112.
- Book through the online service scheduler.
- Call 463-842-1277 with maintenance questions.
- Visit the Brownsburg service center at 450 E Northfield Dr.