Bill Estes Ford Brownsburg
2014 Ford Shelby GT500 Brake Pads
Ford Brake Pads service at Bill Estes Ford Brownsburg in Brownsburg, IN
SCHEDULE NOWFrequently asked questionsFrequently Asked Questions
6 common questions answered
What are the signs a 2014 Ford Shelby GT500 needs new brake pads?Squealing, scraping, grinding, longer pedal travel or increased stopping distance can indicate that a 2014 Ford Shelby GT500 needs brake pad inspection or replacement.
A grinding sound means the friction material is gone and the backing plate is contacting the rotor, so stop driving and book service. Squealing or scraping can also signal wear. An inspection measures the material remaining at all four corners and checks the rest of the system.
- Squeal or scrape during braking
- Grinding caused by contact with the rotor
- Longer pedal travel or stopping distance
What is included in a brake pad replacement on a 2014 Ford Shelby GT500?A brake pad replacement on a 2014 Ford Shelby GT500 includes measuring pad material on all four corners, replacing the pads and inspecting related brake components.
The replacement pads are matched to the vehicle’s braking system. Rotors, calipers, hardware and brake fluid condition are assessed with the pads because brakes wear as a system. These checks help identify conditions that could shorten the life of the new pads.
- Measurement of remaining pad material at all four corners
- Replacement with pads matched to the braking system
- Inspection of rotors, calipers, hardware and brake fluid
How long do brake pads last on a 2014 Ford Shelby GT500?Brake pad life on a 2014 Ford Shelby GT500 is determined by how the vehicle is driven, and measurement during inspection gives the useful answer.
City traffic, towing, hills and hard stops all shorten pad life. The remaining material can differ from one corner to another, so all four corners should be measured. This vehicle’s performance and rear-wheel-drive layout make driving style especially relevant to wear.
- City traffic increases braking frequency
- Hills and hard stops accelerate wear
- Four-corner measurement identifies remaining material
Do the rotors have to be replaced when the pads are replaced on a 2014 Ford Shelby GT500?Rotors do not automatically have to be replaced when pads are replaced on a 2014 Ford Shelby GT500; their condition determines the recommendation.
Rotors are inspected alongside the pads, calipers, hardware and brake fluid. A rotor concern can affect the performance and life of new pads, so replacing pads while ignoring the rest of the system is not a complete assessment. The condition found during inspection guides the next step.
- Rotors are checked during pad service
- Calipers and hardware are assessed with them
- Brake fluid condition is part of the system review
Is it safe to keep driving a 2014 Ford Shelby GT500 with worn brake pads?Driving a 2014 Ford Shelby GT500 with worn brake pads is not safe when braking performance has changed or grinding is present.
Grinding means the friction material is gone and the backing plate is on the rotor, making this a stop-driving-and-book-service situation. Longer stopping distance or pedal travel also warrants prompt attention. An inspection determines the condition of the pads and surrounding components.
- Stop driving if the brakes grind
- Book service for longer stopping distance
- Have all four corners measured and inspected
How do I book brake service at Bill Estes Ford Brownsburg?You can book brake service at Bill Estes Ford Brownsburg by using the online schedule service form or calling 463-842-1277.
The dealership is at 450 E Northfield Dr, Brownsburg, IN 46112. Tell the service team that your vehicle is a 2014 Ford Shelby GT500 and describe any squealing, scraping, grinding or stopping changes. The visit includes four-corner pad measurement and inspection of related brake components.
- Schedule service online
- Call Bill Estes Ford Brownsburg at 463-842-1277
- Visit 450 E Northfield Dr in Brownsburg, Indiana