2014 Ford Focus Check Engine Light

2014 Ford Focus Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard immediately illuminates, but in reality, it is not something that should cause you to shut down in fear correct away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also informed as the OBD (on-board computer diagnostic system) in your Focus. There are hundreds of distinctive codes that your check engine light can represent. While that sounds daunting, with a scant patience, tackling main diagnostics will give you essential knowledge about your vehicle and will also allow that Check Engine Light to do what it is truly supposed to do: be your guide. Unfortunately, accessible and correct vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of reasonable OBD codes, there are also hundreds of reasonable reasons for the light, including:

• Fuel and air metering systems problems
• O2 Sensor
• Transmission issues
• Computer output circuit issues
• Bad Spark Plugs
• Emissions controls issues
• Ignition system faults
• Old Battery
• Loose Gas Cap or Missing Gas Cap

This is why it is imposing for someone who does not have assorted of automotive knowledge to not assume what a code means. Call Bill Estes Ford Brownsburg at 3177903264 today or schedule your check engine light service online today! If the engine light comes on due to a strict concern, you risk damaging your car added by not repairing the issue good away. When your check engine light comes on, you should get it checked out abruptly by a certified Ford mechanic.

How much does it cost to get the engine light checked?

The central price for a check engine light diagnosis & testing is typically between $88 and $111. The convenient news, Bill Estes Ford Brownsburg offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more precarious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it convenient to get the advantageous code reading and diagnosis.

Is it safe to drive your 2014 Ford Focus with the check engine light on?

This question is not exceedingly easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is constantly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more serious problem. If the check engine light is glaring, this means that there is a serious issue and it is recommended to service your Ford Focus quickly. Call the experts at Bill Estes Ford Brownsburg by dialing 3177903264 so you can describe the issues. Or lower your speed and transport your 2014 Ford to our certified mechanics as soon as possible.

Check Engine Light Service 2014 Ford Focus

What do you do when you’re driving along in your Ford Focus and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Ford owners, your heart sinks a microscopic because you have microscopic idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t represent you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Ford Focus checked as soon as sane. Ignoring that warning could end up causing major break to expensive engine parts.

When your 2014 Ford Focus's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t correct, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Ford auto repair mechanics at Bill Estes Ford Brownsburg. There are also a number of relatively fitting code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an trained licensed to indicate the issue and repair it.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Bill Estes Ford Brownsburg to help learn if your vehicle is safe to drive in or if we recommend a tow truck. It could be anything from a damaging sensor to plug wires needing to be replenished. Since each check engine code has its own level of severity, it is rigorous to predict how copious miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy appropriately.

What could cause the check engine light to come on in a 2014 Ford Focus?

When your check engine light comes on, this could be as authentic as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a scrupulous problem that could cause scrupulous damage to your engine and come with a miraculous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow normally means something less scrupulous but a shining check engine light implies that your vehicle’s engine is in scrupulous trouble and service is decisive quickly. If your check engine light is shining in your 2014 Ford Focus, we highly recommend not to drive the automobile and schedule Ford service today. Below is a list of the most authentic reasons your check engine light can come on:

• Your mass airflow sensor (known as MAF) needs to be interchanged. The mass airflow sensor in your Ford Focus is what determines how much fuel is decisive to run your engine efficiently by measuring the reward of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to definitive changes, like altitude. If your Ford Focus is having trouble starting, idling rough or has a precipitous change in the position of the throttle pedal, this could be a sign of a dangerous mass airflow sensor.
• Your catalytic converter is dangerous or going dangerous. The catalytic converter is a part of your 2014 Ford Focus’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Bill Estes Ford Brownsburg offers a complimentary multi-point inspection with every Ford service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Ford Focus will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause different problems from overheating.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or different item can wreak havoc on your 2014 Ford Focus if it’s not installed subsequently. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even stop the vehicle from starting. If these issues sound accepted, bring your Focus to Ford and have our unit of certified mechanics ensure that your aftermarket items were installed subsequently and aren't causing any issue. Getting accessories, chiefly aftermarket parts and accessories, or using OEM parts initial place might estimate a tiny bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• One of the most current and copious cause is that your 2014 Ford Focus gas cap is loose, damaged or missing. The gas cap for your 2014 Ford Focus serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a dangerous fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on suddenly after you put gas in your 2014 Ford Focus, initial thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• New Spark Plugs or Plug Wires are decisive for your 2014 Ford Focus. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are dangerous or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, best to more expensive repairs.
• The battery is low or dead. The battery in your 2014 Ford Focus is every effective. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did several decades ago, and they don't really require maintenance. The estimate of a new one depends on the type of Ford you drive, but check our present service coupons and specials.
• Your O2 Sensor (Oxygen Sensor) needs to be interchanged. The Oxygen sensor, known as the O2 sensor, measures the reward of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less handy when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Ford Focus's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to select the polite mixture of air and fuel that enters the cylinders in your engine. A dangerous O2 sensor can also cause a car to fail an emissions test.
• Your 2014 Ford Focus has a vacuum leak. Every Ford Focus has a vacuum system that performs a huge variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, chiefly if they’re exposed to imposing heat or extreme bleak.

What Does the Check Engine Light Mean?

One of the most customarily misunderstood lights or indicators in your 2014 Ford Focus is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2014 Ford Focus. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can indicate a mixture of chance things. It can be as authentic as your gas cap being loose or as serious as engine knocking. If your check engine light is on in your 2014 Ford Focus, contact Bill Estes Ford Brownsburg. Our Ford service department can help you find out what code is turning your check engine light on or scan why your check engine light is shining. Contact Bill Estes Ford Brownsburg today!

Will the check engine light reset itself?

The check engine light on your 2014 Ford Focus will customarily shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going logical, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Ford Focus light will go off after about 20-40 miles. If you travel to work over that reward and the light is still on, you will need to bring it in to Bill Estes Ford Brownsburg so the light and code can be double-checked and reset.

2014 Ford Focus Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several ordinary causes comprising something as pragmatic as a loose gas cap. Other ordinary reasons for a Check Engine Light are a malfunction with the fuel injection system, faulty head gasket, faulty emissions control part, damaged oxygen sensor, dirty mass airflow sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Ford Certified Technicians and the certified service protocol to isolate the root problem and repair it as decisive to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Ford issue was fixed.

Every 2014 Ford Focus was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its critical systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is culpable nor what to do about it. That’s where we come in; Bill Estes Ford Brownsburg provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Particularly Qualified Service licensed.

2014 Ford Focus Check Engine Light

A flashing light implies that the problem is harsh and if not taken care of urgently may result in major wear and tear to the vehicle. If the check engine light in your 2014 Ford Focus starts flashing, that means that the problem needs immediate attention and your Ford should be brought in urgently. This blinking light usually indicates a severe engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can instantly boost the temperature of the catalytic converter to a point where break is conceivable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can explicitly be the cause. A bad, former or dirty spark plug can cause the engine to misfire. If your check engine light is shining, please contact our team of automotive advisors at Bill Estes Ford Brownsburg expeditiously by calling 3177903264. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a extraordinarily expensive repair.