Bill Estes Ford Brownsburg
2013 Ford Explorer Oil Filter
Ford Oil Filter service at Bill Estes Ford Brownsburg in Brownsburg, IN
SCHEDULE NOWFrequently asked questionsFrequently Asked Questions
6 common questions answered
Is the oil filter replaced every time a 2013 Ford Explorer has its oil changed?The oil filter should be replaced with the oil when the service is performed.
A fresh filter allows the new oil to circulate through a clean filtering surface. A loaded filter can open its bypass valve, allowing oil to circulate without filtration. The maintenance timing should follow the manufacturer’s schedule and the vehicle’s service history.
- Filter matched to the fitted engine
- Filter replaced alongside the oil
- Seal checked after the engine runs
What is included in an oil filter replacement on a 2013 Ford Explorer?The service includes an engine-matched filter, a new drain plug gasket or washer where used, and a post-service leak check.
The filter is replaced alongside the oil, then the engine is run so the technician can inspect the filter seal. This confirms the filter is seated correctly. The oil grade the manufacturer specifies for the engine is used as part of the oil service.
- Filter matched to the engine
- Drain plug gasket or washer where applicable
- Leak check at the filter seal
What happens if the oil filter on a 2013 Ford Explorer is not replaced?A loaded filter may open its bypass valve, allowing oil to circulate without filtration.
The engine can continue receiving oil, but it may no longer receive filtered oil. Debris carried by the oil can therefore continue through the lubrication system. An inspection and the vehicle’s service history help determine the appropriate next service.
- Debris remains captured only until the filter loads
- The bypass valve can open
- Unfiltered oil may circulate
Does a 2013 Ford Explorer need a specific oil filter?Yes, the filter is matched to the 3.5-liter, six-cylinder engine fitted to the 2013 Ford Explorer.
Filters are not interchangeable across engines, so selection should be based on the engine being serviced. This model’s displacement ranges from 3,496 to 3,497 cc across trims. Bill Estes Ford Brownsburg can match the filter to the vehicle’s fitted engine without relying on a universal component.
- 3.5-liter engine size
- Six-cylinder V6 layout
- Displacement of 3,496 to 3,497 cc across trims
Can the oil be changed on a 2013 Ford Explorer without changing the filter?The oil can be changed separately, but the filter should be replaced with the oil.
The filter holds debris carried away by the oil and may open its bypass valve once loaded. Replacing it at the same service restores a clean filtering surface. The manufacturer’s schedule and the vehicle’s service history determine when the service should be booked.
- Filter captures oil-borne debris
- A loaded filter may allow unfiltered flow
- Replacement accompanies the oil service
How do I book an oil and filter service at Bill Estes Ford Brownsburg?You can schedule an appointment online or call Bill Estes Ford Brownsburg at 463-842-1277.
The service center can arrange an oil and filter service for your 2013 Ford Explorer and match the filter to its fitted engine. You can also review service specials before contacting the dealership in Brownsburg.
- Online service scheduling
- Phone support at 463-842-1277
- Service location at 450 E Northfield Dr